Plumbing leaks can happen at any point in time to any home. Homeowners should conduct an annual inspection of most appliances and plumbing lines in a home to determine if a leak may be present.
The following are some recommended steps homeowners can take to determine if a plumbing leak is present in a home.
The Hot Water Tank
Most homeowners assume plumbing leaks will occur with toilets or sinks, but they often occur with hot water tanks. Unfortunately, many hot water tank leaks go undetected and can raise the homeowner’s water bill by anywhere from several dozen dollars to hundreds of dollars.
The best way to check for a leak with a hot water tank is to check the pressure valve on the tank. This is often located near a floor drain or even directly inside a drain pipe.
Toilets
One of the most common areas in the home for a leak is the toilet. People who are conducting Leak Detection in Bellevue for the toilet can do so easily by just removing the lid off of the back of the tank.
Once the lid has been removed, the homeowner should listen for any type of unusual noise. Unusual noises that often indicate a leak is present include hissing or even a slight drip.
If you are unable to determine if a leak is present by listening, there is another trick that may be helpful. Homeowners can place a few drops of food coloring into the water in the toilet’s tank. This will color the water in the back of the toilet.
After a few hours, the homeowner can check the toilet. If colored water is present in the bowl of the toilet, it is a good indicating factor that a leak is present.
If these methods do not work or if you feel that a leak is still going undetected, you may want to call a professional plumbing company. Homeowners who are looking to conduct leak detection in Bellevue can contact West Coast Plumbing. West Coast Plumbing provides numerous plumbing services, including leak detection services to Western Washington.
