When homeowners aren’t getting hot water, or they aren’t getting enough hot water, there is likely a problem with the water heater. Before calling in a professional technician, homeowners can do their own troubleshooting. Sometimes, the problems are simple, and require no special tools or training to fix. If it is discovered that the problem is more complicated, then it is time to call in the experts for repair. There are many problems that are common in all types of water heaters, both gas and electric, including leaking and a lack of hot water.
When a Water Heater Colorado Springs CO is leaking, there could be a few reasons for it. Homeowners will know if there is a leak, because there will be water near the water heaters. Some of the causes include rusted tanks, too much pressure from the TPR valve, or loosing fittings. While loose fittings and valve problems are easy to fix, if the tank is rusted it will be necessary to have it replaced. This should be done by professional plumbers.
Another problem with water heaters is when there is a buildup of sediment or lime in the tank. It is important to know what to do in order to prevent this from happening, and what to do when it does happen. When sediment is cleaned out of the tank, it will run more efficiently. One way to tell if there is a sediment buildup is if there are any popping sounds coming from the water heater, or if there is a rotten egg odor in the home.
If there is no hot water, the first thing to check is to see if the circuit has been tripped. If this is the case, simply flip the switch. The pilot light may also be out, and simply needs to be lit again. It could be that the element is burned out, and it will need to be replaced. Or, the thermostat could either be on the wrong setting, or not working at all. To learn more about repairs for a Water Heater in Colorado Springs, CO, browse site.
